张宣地区大白阳金矿床包裹体特征及矿床剥蚀保存     

徐渴鑫  申俊峰  李胜荣  黄绍峰  张士全  王业晗 《矿床地质》2020,39(6):1030-1048

华北克拉通破坏及其成矿事件已引起地学界的广泛关注，其中张宣地区是华北克拉通的重要金矿集中区之一，通过对张宣地区大白阳金矿成矿类型、成矿深度及剥蚀保存的探讨，为区内深部找矿提供了重要的参考依据。文章通过流体包裹体研究对大白阳金矿成矿温度及成矿深度进行计算，利用矿物压力计对矿区周边岩体侵位深度进行估算。流体包裹体研究结果显示大白阳金矿成矿温度160~220℃、盐度w（NaCl_eq）=9%~15%，密度0.78~0.97 g/cm³、压力46.3~104.6 MPa，成矿流体主要属于NaCl-H₂O体系，成矿过程中流体温度和盐度都呈现明显的降低趋势。采用黑云母压力计，针对大白阳金矿周边谷嘴子、杨家营以及前坝口花岗质岩体的侵位深度进行估算，并对大白阳金矿自形成以来的剥蚀保存情况进行了探讨，估算结果显示，谷嘴子岩体（236.0 Ma）成岩深度7.02 km、杨家营岩体（138.6 Ma）成岩深度2.66 km、前坝口岩体（140.2 Ma）成岩深度3.13 km。结合前人的裂变径迹结果，认为张宣地区自中生代以来剥蚀速率为0.022~0.029 km/Ma，剥蚀量为3 km。按照前述成矿压力46.3~104.6 MPa换算，大白阳金矿成矿深度6.93 km，剥蚀量小于矿床成矿深度，说明该矿深部仍具有良好的找矿前景。  相似文献   

东昆仑夏日哈木地区二长花岗岩年代学、地球化学特征及地质意义     

郭峰  王盘喜  卞孝东  冯乃琦 《中国地质调查》2020,7(6):51-60

东昆仑夏日哈木地区首次发现了早泥盆世二长花岗岩,对其开展年代学和地球化学特征研究,进一步探讨其岩石成因和构造地质背景。二长花岗岩锆石U-Pb年龄为(412.1±5.7) Ma(MSWD=0.95),形成于早泥盆世早期; 岩石为过弱铝质亚碱性花岗岩,富SiO₂(含量为71.41%~72.46%)、K₂O(含量为5.27%~6.16%),贫Fe₂O₃(含量为1.86%~2.05%)、P₂O₅(含量为0.08%~0.12%),富集轻稀土元素,具明显的负Eu异常; 在原始地幔标准化微量元素蛛网图上可以看出,岩石明显富集Rb、Th、Zr、Hf,强烈亏损Nb、Sr、P、Ti、Ba。夏日哈木地区二长花岗岩属于I型花岗岩,其源岩可能由幔源岩浆底侵加热下地壳岩石致其部分熔融而形成,处于由同碰撞向后碰撞转换的构造环境,说明东昆仑夏日哈木地区在早泥盆世早期已进入伸展阶段。  相似文献   

帕米尔高原Rushan-Pshart古特提斯洋或中特提斯洋争论的岩石地球化学证据     

徐天德  王世锋  汤文坤  姚鑫 《地质科学》2020,(1):218-233

帕米尔高原上广泛分布的加里东期火山岩,印支期火山岩与燕山期火山岩被认为是块体依次向北俯冲拼贴到欧亚板块上的产物。特别是燕山期火山岩被认为是Rushan-Pshart中特提斯洋闭合的产物。但近年来地层古生物、火山岩证据不断表明Rushan-Pshart洋闭合时间在晚三叠一早侏罗世,由此限定Rushan-Pshart古特提斯洋性质,而帕米尔高原上广泛分布的燕山期火山岩是更南部的Shyok中特提斯洋闭合的产物。目前,中国境内Rushan-Pshart缝合带属性的研究工作展开较晚,研究程度较低。我们对塔什库尔干明铁盖沟一线燕山期火山岩带展开的工作发现零星分布的印支期花岗岩。印支期花岗岩错石U・Pb年龄显示岩体侵位时间在201 Ma左右。全岩主量元素特征表明岩石为I型高钾钙碱性闪长花岗岩;稀土元素在球粒陨石标准化图解中呈轻稀土元素相对富集,重稀土元素相对亏损的右倾海鸥型。明铁盖岩体的微量元素显示大离子亲石元素明显富集,而高场强元素明显亏损。稀土微量元素特征倾向花岗岩属性为岛弧型花岗岩,Sr-Nd-Hf同位素比值特征显示岩体形成于下地壳部分熔融环境。岩体的地化特征表明岩体形成的构造环境为板块汇聚的洋壳俯冲阶段,结合区域地质特征,我们将花岗岩体归为Rushan-Pshart古特提斯洋壳俯冲消减的产物。Rushan-Pshart缝合带传统上认为是中特提斯带,近年的研究进展认为其为古特提斯缝合带,本文的工作支持这种观点。Rushan-Pshart古特提斯缝合带的确立对帕米尔高原与青藏高原主体的块体对比提供了可信的对比方案,并对青藏高原新生代陆内变形方式的争论提供了可靠的证据。  相似文献   

花岗岩残积土动态冲击性能的SHPB试验研究     

刘新宇  张先伟  岳好真  孔令伟  徐超 《岩土力学》2020,41(6):2001-2008

为研究花岗岩残积土的动态冲击性能，开展了高速冲击下的分离式霍普金森压杆（SHPB）试验，与常规应变率下的试验结果比较，分析了高应变率对花岗岩残积土的应力?应变特性和强度的影响。结果表明：低、高应变率下的花岗岩残积土的?-?a（轴向应力?轴向应变）曲线均呈现出软化型。随着应变率 增加，?-?a曲线向?a增大的方向移动，破坏应变?af增加。但高应变率下?af增加的程度更加明显。花岗岩残积土的峰值强度普遍具有应变率依赖性，二者可用直线关系拟合，但低、高应变率下的拟合关系并不一致。提出了率敏性因子m定量评价依赖性强弱。研究发现，随着应变率的提高，强度的应变率依赖性减弱，低应变率下的m为26.694，而高应变率下仅为0.013。相关试验结果指出，高速冲击荷载对土体总体有害。工程中应该采取合理措施控制冲击荷载的危害。该研究有助于深化花岗岩残积土动态冲击性能的理解，为相关工程的施工与设计提供技术参考。  相似文献   

Granite is an Effective Helium Source Rock: Insights from the Helium Generation and Release Characteristics in Granites from the North Qinling Orogen, China     

ZHANG Wen  LI Yuhong  ZHAO Fenghu  ZHOU Zheng  HAN Wei  ZHOU Junlin  ZHANG Qiao 《《地质学报》英文版》2020,94(1):114-125

Global helium(He) shortage is a challenging problem; however, the types of helium source rock and the mechanisms of He generation and release therein remain still poorly understood. In this study, in order to evaluate the potential of granite as an effective helium source rock, we collected granitic samples from the North Qinling Orogen, Central China, in the south of the helium-rich Weihe Basin. The helium generation and release behaviors in granite were studied through analysis of U and Th concentrations, EMPA images, and He and Ar concentrations and isotopic ratios extracted by crushing and stepwise heating. The results indicate that Ar has a better retention and a lower mobility than He. 3 He/4 He ratios released by crushing and stepwise heating are 0.016–0.056 RA and 0.003–0.572 RA, respectively, where RA is the atmospheric 3 He/4 He of 1.4×10-6, reflecting a crustal and radiogenic source. Helium concentrations extracted by the two ways are 0.13–0.95 ucm3 STP/g and 7.82–115.62 ucm3 STP/g, respectively, suggesting that matrix-sited He accounts for more than 98% of total helium preserved in granite. In addition, the total generated He amounts in granites are calculated based on the measured U and Th concentrations in granitic samples. Dividing the preserved He quantities by the generated He amounts, it turned out that less than 10% of He produced since the formation of the granite is preserved in the rock over geological time, suggesting that more than 90% generated He can be transferred to the Weihe Basin. Temperature and fracture are the two critical factors controlling He release. Based on the relationship between He diffusivity of granites and temperature and the He closure temperatures of a variety of U-and Th-rich minerals(27–250°C), we estimate that He can be partially released out of granite at the depths 400 m and totally released at the depths 7800 m. Fractures provide effective transfer of free He from deep source rocks to shallow reservoirs. Finally, a model on granite as an effective helium source rock is established. We suggest exploring He resources in hydrocarbon basins with granitic basement(or adjacent to granite bodies), high geothermal field, and young active fractures.  相似文献   

浙南花岗岩残积土物质结构及工程地质特性研究     

孙强  张泰丽  伍剑波  王赫生 《地质论评》2020,66(S1):163-166

  相似文献   

西藏雄村斑岩型铜(金)矿床Ⅰ、Ⅱ号矿体热液黑云母特征及地质意义     

肖鸿天  谢富伟  郎兴海  冉凤琴 《岩石矿物学杂志》2020,39(4):469-480

雄村铜(金)矿区位于西藏冈底斯成矿带中段南缘,由Ⅰ、Ⅱ、Ⅲ号矿体和多个矿化体组成。本文以Ⅰ、Ⅱ号矿体钾硅酸盐化蚀变带内的热液黑云母为研究对象,采用光薄片镜下鉴定、电子探针等分析方法,系统研究了热液黑云母的产状和成分特征。结果显示,雄村矿区Ⅰ号矿体黑云母类型主要为金云母和镁质黑云母;Ⅱ号矿体黑云母类型为镁质黑云母。两个矿体黑云母都具有低Ti(TiO_2 3%)、高Al(Al_2O_315%)的特点,且具有较高的MgO含量,Mg/Fe0.5,K/Na10,显示了与矿化良好的相关性。Ⅰ号矿体热液黑云母平均结晶温度470℃,氧逸度位于镍-氧化镍缓冲剂与磁铁矿-钛铁矿缓冲剂之间(NNO—HM);Ⅱ号矿体热液黑云母平均结晶温度234℃,氧逸度位于镍-氧化镍缓冲剂与铁橄榄石-石英-磁铁矿缓冲剂之间(NNO—FQM),说明Ⅰ号矿体形成于较高温、高氧逸度的热液系统,Ⅱ号矿体形成于相对较低温、低氧逸度的热液系统。此外,Ⅰ号矿体热液黑云母Ⅳ(F)值介于0.61～2.72之间,平均值1.26,Ⅳ(Cl)值介于-5.49～-4.53之间,平均值-5.03,Ⅳ(F/Cl)值介于5.63～7.89之间,平均值6.29;Ⅱ号矿体热液黑云母Ⅳ(F)值介于1.83～3.32之间,平均值2.66,Ⅳ(Cl)值介于-5.64～-4.89之间,平均值-5.31,Ⅳ(F/Cl)值介于7.14～8.68之间,平均值7.97,说明Ⅰ、Ⅱ号矿体都形成于富Cl的热液系统,且Ⅱ号矿体热液较Ⅰ号矿体更富Cl,贫F。富Cl流体易萃取流体中的Cu和Au等金属元素并以Cl的络合物形式运移,在沿构造裂隙向上运移的过程中,物理化学条件发生改变,使得流体中金属元素络合物溶解度降低,促使硫化物沉淀成矿。  相似文献   

Impacts of confining pressure and safety thickness on water and mud inrush in weathered granite     

Jinquan Liu  Weizhong Chen  Zhiping Deng  Taogen Liu 《Marine Georesources & Geotechnology》2020,38(2):144-153

Abstract

Due to the strong disintegration and water erosion of completely weathered granite, water and mud inrush disasters are apt to take place in this zone during underwater tunnel construction. The pore, compactness, seepage path length, fracture geometries and their interconnections for water and mud transfer are strongly influenced by confining pressure and waterproof-resistant slab safety thickness. In order to inspect the influence, a series of experiments based on a self-designed testing system and non-Darcy testing method were performed. The results indicated that the water and mud inrush evolution increased with the increase of confining pressure and decreased with the increase of safety thickness. In particular, the confining pressure mainly influences the initial evolution stage, and a critical safety thickness to prevent water and mud inrush is obtained. Besides, the non-Darcy testing method results shows that the water and mud inrush evolution affects the influence of non-Darcy flow. For example, while the safety thickness was smaller than the critical value, the evolution was large and unstable and its behavior transferred into nonlinear. In this case, the flow changed to non-Darcy flow.  相似文献   

辽北开原地区房木花岗斑岩LA-ICP-MS锆石U-Pb年龄及地球化学特征     

豆世勇 《吉林大学学报(地球科学版)》2020,50(6):1752-1765

研究区位于华北克拉通北缘东段、华北克拉通与兴蒙造山带的交接部位。本文通过对辽北开原地区房木花岗斑岩的岩石学、年代学和地球化学研究，探讨了其形成时代、岩石成因和构造环境，并进一步探讨了华北克拉通东部岩石圈减薄的起始时间。用LA-ICP-MS技术测定了花岗斑岩的锆石U-Pb同位素，获得其锆石²⁰⁶Pb/²³⁸U加权平均年龄为（117±1）Ma，表明花岗斑岩形成于早白垩世。花岗斑岩具有高硅、富碱、贫镁和钙的特征，富集大离子亲石元素（K、Rb）和高场强元素（Th、Ta、Nb），亏损Sr、Ba、P、Ti元素，稀土配分曲线均呈现右倾海鸥型，具有明显的负Eu异常；显示研究区花岗斑岩为A型（A₁亚型）花岗岩，形成于古太平洋俯冲的后造山伸展环境，其岩浆源于地幔物质上涌而导致的地壳物质重熔。研究区在（156±1）Ma之前，属于挤压造山环境，表明研究区岩石圈减薄时间应处于156~117 Ma之间。  相似文献   

冈底斯中段容果地区二长花岗岩锆石U-Pb年龄及其地球化学特征     

胡林  徐刚  刘大明 《中国地质调查》2020,7(4):67-75

为确定容果地区二长花岗岩的形成时代、成因及其地质意义,对容果地区二长花岗岩进行了岩相学、LA-ICP-MS锆石U-Pb年龄及地球化学研究。结果表明: 二长花岗岩中的锆石为岩浆成因,²⁰⁶Pb/²³⁸U年龄加权平均值为(69±1) Ma,侵入时代属于晚白垩世; 二长花岗岩中Al₂O₃含量为13.83%~14.41%,Na₂O含量为3.68%~3.94%,K₂O含量为4.28%~4.35%, K₂O/Na₂O为1.08~1.18,相对富钾,铝饱和指数A/CNK平均为1.02,属弱过铝质岩石; 微量元素特征表现为相对富集Rb、U、K等大离子亲石元素,亏损Nb、Ta、Ti等高场强元素的特征。结合区域构造演化背景,可得出在80~69 Ma之间,该区的岩浆活动并未停止,仍然持续在发生,所生成的岩体是新特提斯洋壳俯冲的岩浆产物,形成于造山环境下,形成过程贯穿整个造山运动。  相似文献